Hp Officejet Pro 8710 Setup

HP Officejet Pro 8210

HP OfficeJet Pro 8710 is an inkjet printer designed for micro and small offices. The printer supports both wired and wireless connection types. In case of any network fluctuations, you can use the printer’s Wi-Fi Direct feature to connect directly from any mobile device or tablet. The printer also comes with the NFC (Near Field Communication) support that lets you print wirelessly from any network device. It is capable of printing up to 22 pages per minute. In this article, we have discussed the HP OfficeJet Pro 8710 setup process. Continue reading this page till the end.


  • Unbox the printer and take off the protective materials.
  • Cross-check whether you have received all the contents inside the box.
  • Box contents include HP OfficeJet Pro 8710 printer, Ink cartridges (Black, Cyan, Magenta, and Yellow), Power cord, CD-ROM, User manual, Warranty card, and some paper stuff.
  • Secure the power cord to the printer’s rear end and an electrical supply.
  • Firmly press the printer's Power button to turn on the printer.
  • Use the printer’s 2.65 - inch touch screen to make the required changes (date, time, language, etc.)
  • Also, you can modify the printer settings before moving on to the below steps.


  • Pull out the main input tray.
  • Slide the paper-width guides out as much as possible.
  • Insert the paper with its printing side facing downwards.
  • Reinsert the paper tray.
  • Once the paper is loaded, pull out the output tray extension.
  • Open the printer cover and the cartridge access door.
  • Insert the ink cartridges (Black, Cyan, Magenta, and Yellow) into their respective slots.
  • Once installed successfully, close the printer cover.
  • In order to check the ink levels, follow the steps below.
  • Go to your printer’s control panel.
  • Go to the Setup menu.
  • Touch Tools.
  • Tap on Display Estimated Ink Levels.


  • Locate the downloaded setup file (Can be found on your PC’s Downloads folder or browser’s download section).
  • Double-click on the downloaded setup file to kick off the installation.
  • Select the preferred language and click OK.
  • Go through the End-User License Agreement and click on the Yes button.
  • Choose your connection type.
  • You can select the wired/wireless connection (depending on your choice).
  • Follow the on-screen prompts and establish the connection between your HP OfficeJet Pro 8710 printer and the computer.
  • Click Finish to close the installation window.
  • Restart your computer (when the driver installation process is finished).
  • Once the installation is over, print a test page to cross-check if the printer is working fine without any issues.


Note: The below driver download and installation steps will apply for both Windows and Mac computers.

  • First, switch on your PC and connect it to a stable Internet.
  • Visit the printer’s official support page.
  • If the OS family and OS version are incorrect, then select them according to the system configuration.
  • Once selected, click on Change.
  • From the list of drivers, choose the relevant driver and download it on your computer.

The printer installation process is simple and easy when the steps are followed in an orderly manner. If you need any expert advice, call our technicians by clicking the Call button. They will sort out all your problems.

Copyright © 2022 - 2023 hp-ojpro.com | All rights are reserved.

Call Us