Configure HP Officejet Pro 8210 Setup

[Fixed] - HP Officejet Pro 8210 Setup

A printer’s hardware setup is an initial process you need to perform before you start operating it or using its functions. If you have recently bought the HP OfficeJet Pro 8210 printer, just follow the below instructions carefully and complete your HP officejet pro 8210 setup.

Hardware Setup

Components Of Inside The Package

First, check if all the below items are available inside the product box.

  • HP OfficeJet Pro 8210 printer
  • HP 952 Ink Cartridges (Black, Cyan, Magenta, Yellow)
  • Software CD-ROM
  • Setup Poster
  • Getting Started Guide
  • Power Cord

Unpack Printer

  • Start by unboxing the printer package.
  • Now, remove the documentation, ink cartridges, and power cord from the printer box. Now, gently pull out the printer from the box.
  • Next, discard the packing materials from the inside of the printer.
  • Get rid of the protective tapes and packing materials from the inside of the printer.

Power On The Printer

  • First, connect the power cord to your printer’s rear and the other end to an electrical outlet.
  • Hit the Power button to turn on your printer.
  • Now, perform the on-screen prompts on your printer and complete the initial setup.

Installing HP officejet pro 8210 ink cartridges

  • Now, lift the ink cartridge access door and wait until the carriage moves to the access area.
  • Unwrap one of the ink cartridges from the package.
  • Discard the protective tape and the orange cap from the cartridge. Slowly insert the ink cartridge into its slot on the HP OfficeJet Pro 8210 printer.
  • Installing HP officejet pro 8210 ink cartridges
  • Ensure that the color on the ink cartridge matches the one on the slot.
  • Repeat the above instructions to install the remaining ink cartridges inside the printer. You can now close the cartridge access door and hit OK on the printer’s control panel.
  • Now, you can start the alignment process on your HP OfficeJet Pro 8210 printer.

HP officejet pro 8210 - Load The Paper

  • Pull out the paper input tray from the printer.
  • Slide the paper width guide to the outermost position.
  • Insert the plain white sheets into the input tray and adjust the paper width guide until it stops at the edges of the stack.
  • Now, insert the input tray into the HP OfficeJet Pro 8210 printer for HP officejet pro 8210 setup.
  • Loading The Paper
  • Pull out the output tray, and the extender will open automatically.

Software Setup

HP Officejet Pro 8210 Driver Download

  • First, launch the default browser on your Computer.
  • Now, visit the HP OfficeJet Pro 8210 printer’s official support page to download the driver.
  • At the top of the current page, you should click on the Support tab and select the Software and drivers option from the list.
  • Choose the Printer category.
  • Now, type your printer model name below the Enter your product name option and click on the Submit button. In the next window that appears, your computer’s operating system will be shown automatically at the top.
  • Pick the HP OfficeJet Pro 8210 printer’s Full Feature Software and Drivers file under the Driver-Product Installation Software section and click the Download option.
  • Now, your driver will get downloaded on your computer.
  • Next, finish the on-screen instructions to install the printer driver on the computer.

You can complete the HP officejet pro 8210 setup(Hardware & Software) by following the above instructions. In case you have any other queries regarding your printer, contact our technical experts using the Call button.

Copyright © 2022 - 2023 hp-ojpro.com | All rights are reserved.

Call Us