Setup HP Officejet Pro 8210 Printer

How To Setup HP Officejet Pro 8210 Printer?

Do you have concerns about setting up your newly purchased HP OfficeJet Pro 8210 printer? Keep your worries aside. You are on the right site, and we are here to assist you in setting up your brand-new printer.So, let’s begin your printer setup by carrying out the steps provided on this page.

HP Officejet Pro 8210 Hardware Setup

Components Inside The Package

First, check if all the below items are available inside your printer box. You can do this task after you unbox the printer. Ensure that they have been delivered without any damages.

  • HP 8210 printer
  • HP 952 Ink Cartridges (Black, Cyan, Magenta, and Yellow)
  • Software CD-ROM
  • Setup Poster
  • Getting Started Guide
  • Power Cable

Unpack The Printer

  • First, select a proper place to unbox your printer. You can use the same location to operate your printer. A stable, sturdy table would suffice.
  • Next, keep the HP printer on the selected surface.
  • Now, you can start unboxing the printer package.
  • Remove all the contents from the box.
  • Use both your hands and pull out the HP Officejet Pro 8210 Printer from the box slowly.
  • Discard the packing materials outside the printer.
  • Uncover the printer from its plastic bag.
  • Now, you can remove all the blue protective tapes around the HP OfficeJet printer.

Powering On The Printer

  • First, get hold of the power cable supplied with your printer package.
  • Next, connect the cable to your HP printer’s rear section.
  • And, the opposite end should be plugged into an electrical outlet.
  • Hit the Power button to turn on your printer.
  • Now, perform the on-screen prompts on your printer.

Install The Ink Cartridges

  • Now, lift the ink cartridge access door.
  • Wait patiently until the carriage moves to the access area.
  • Remove one of the ink cartridges from its package.
  • Dispose of the protective tape and the orange cap from the unwrapped cartridge.
  • Start inserting the ink cartridge into the respective slot carefully.
  • Confirm that the color on the ink cartridge matches the one on the slot. And continue to read the following steps and complete your HP Officejet Pro 8210 Printer setup.
  • You just have to repeat the above instructions to insert the remaining ink cartridges inside the printer.
  • Close the cartridge access door and hit OK on the printer’s control panel.
  • Now, you can start the alignment process on your OfficeJet Pro 8210 printer.

Load The Paper

  • From your HP printer, pull out the paper input tray.
  • Move the paper width guide (in the tray) to the extreme position.
  • Get hold of a stack of plain white sheets. Fan and align the sheets well before loading. Avoid overloading of paper. Also, refrain from loading curled, damp, or torn paper into the printer.
  • Insert the stack into the input tray and adjust the paper width guide until it stops at the edges of the stack.
  • Now, insert the input tray back into the printer.
  • Pull out the output tray, and the extender will open automatically.

HP Officejet Pro 8210 Software Setup

  • First, go to your computer and then launch the default browser on it.
  • Next, navigate to your HP officejet pro 8210 printer’s official support page using the browser.
  • At the top of the page, you need to click the Support tab and select the Software and drivers option. Follow this action by picking the Printer category.
  • Input your printer model name under the Enter your product name option and click on the Submit button.
  • Now, your computer’s Operating System will be detected and shown automatically at the top of the next page.
  • If you want to change the OS, just click on the Choose a different OS link. Next, pick your Operating system from the list. Choose the OS version as well.
  • Pick the OfficeJet Pro 8210 printer’s Full Feature Software and Drivers file under the Driver-Product Installation Software section.
  • Click the Download option.
  • Now, you will find that the driver starts to download. Once the process is over, you can launch the downloaded setup file and begin the installation.
  • Simply execute the displayed on-screen prompts to finish off the installation.

You can complete the HP OfficeJet Pro 8210 printer’s hardware and software setup by following the above instructions.

If you are facing any other trouble with your printer, contact our technical experts using the Call button.

Call Us

Copyright © 2022 - 2023 hp-ojpro.com | All rights are reserved.

Call Us