HP Officejet Pro 8028e Printer Setup

HP Officejet Pro 8028e All In One Printer Setup

Are you wondering how to set up your newly purchased HP Officejet Pro 8028e All In One Printer? You need not brood over it. Because we have your back covered!The printer setup is really an important process that you need to perform before you start to work with it. So, you can complete your printer’s hardware and software Setup by following the below instructions.

Hardware Setup

Contents Inside The Box

  • HP OfficeJet Pro 8028e printer
  • HP 910 Setup Ink Cartridges (Black, Cyan, Magenta, Yellow)
  • User Guide
  • Regulatory Flyer
  • Setup Poster
  • Reference Guide
  • Power Cord

Unbox The Printer

  • Open the HP OfficeJet Pro 8028e printer box.
  • Take out all the printer accessories from the package.
  • Using both your hands, gently pull the printer out of the box.
  • Remove all the packing materials from both sides of the printer. In case you forget to discard all the protective tapes and packing materials, you might face issues while operating the printer.

Switching On The Printer

  • Connect the power cable between the rear port of the printer and the power socket.
  • Your HP officejet pro 8028e printer will turn on automatically.
  • Access your printer’s control panel and select your language.
  • Tap Confirm.
  • Pick your country/region and touch Confirm on the printer screen.

Ink Cartridges Installation

  • Now, open the front door of the printer and then lift the ink cartridge access door.
  • Take out the plastic guard as well.
  • Ensure to remove the cartridge packing. Next, discard the orange guards and the tape.
  • Insert one of the cartridges into the indicated slot on the printer.
  • Insert The Cartridges
  • Now, close the ink cartridge access door.
  • Then, close the printer’s front door.

Load The Paper

  • Open the printer’s paper tray. Next, take out the cardboard.
  • Next, you should slide the paper width guide as far as possible.
  • Place Letter or A4 paper on the paper tray and adjust the paper width guide against the stack.
  • Now, you can close the paper tray.
  • Loading The Paper
  • Next, you can pull out the extender of the output tray.
  • Go ahead and make use of the printer control panel for printing and scanning the alignment page.

With the above step, you have finished the HP OfficeJet Pro 8028e printer’s hardware setup. Now, proceed with the software installation.

Software Setup

  • Open the desired web browser on your computer.
  • Now, go to the HP OfficeJet Pro 8028e printer’s official support page.
  • Choose the Support tab and select the Software and drivers option at the top of the page.
  • Click on the Printer category. In the next window, input your printer model name under the Enter your product name field.
  • Now, just click on Submit.
  • Keep executing the on-screen prompts until you reach your driver files.
  • Go on and select the most appropriate printer’s driver file below the Installation Software and Full/Basic Driver section.
  • Click on the Download button.
  • Now, your HP OfficeJet Pro 8028e printer driver will start to download.

You can complete your HP Officejet Pro 8028e All In One Printer’s hardware and software setup by following the above instructions.

For more clarifications, contact our technical experts using the call option on this page.

Copyright © 2022 - 2023 hp-ojpro.com | All rights are reserved.

Call Us