HP Officejet Pro 8025 Cartridge Problem

Steps For HP Officejet Pro 8025 Cartridge Problem

HP OfficeJet Pro 8025 is a color printer that can print, scan, copy, fax, and do two-sided printing. We can connect the printer wirelessly to any of the network devices that support wireless capabilities. The printer can print 20 black and white pages per minute and 10 color pages per minute. This printer is best for home, colleges, and small offices. HP OfficeJet Pro 8025 is intended to work with the latest ink cartridges with electronic circuitry in them. Periodic maintenance and firmware updates will assure the effectiveness of the printer. Here, we will discuss one of the most frequently asked questions by printer users - How to get rid of the HP OfficeJet Pro 8025 cartridge problem? 

Power Reset Your HP Printer:

As the first and the foremost step, power reset the printer.

  • Keep the printer turned on and remove the power cord from it.
  • If possible, unplug the USB connection.
  • Wait patiently for about 2-3 minutes.
  • Now, attach the power cord to the power outlet and the printer.
  • Press the Power button to turn on the HP printer for the second time.
  • After finishing the warm-up period, the printer will become idle and no light on the device blinks.
  • Firmly press and hold the printer’s Power button for about 30 seconds.
  • This process will remove any residual charges from the printer.

Perform Deep Cleaning:

  • Connect your HP OfficeJet Pro printer to a reliable power supply.
  • Wake up the printer screen.
  • Press the MENU button.
  • Use the on-screen navigation buttons to go to the Setup menu.
  • Press the OK button to go inside the Maintenance screen.
  • Select the Deep cleaning option.

Note: Keep in mind that deep cleaning utilizes a lot of ink.

  • Perform deep cleaning about two to three times.

Now, see whether you are able to print documents properly.

HP OfficeJet Pro 8025 Cartridge Problem

Clean The Printhead:

  • Open the scanner unit.
  • Open the cartridge access door.
  • When the carriage unit slides to the middle, just pull out the power cord without powering off the printer.
  • Remove the ink cartridges (Black, Cyan, Magenta, Yellow) from the respective slots.
  • Pull out the printhead using your fingers.
  • Clean the printhead and re-insert it. 
  • Insert the ink cartridges.
  • Close the cartridge area.
  • Close the scanner unit.

Remove And Then Reinstall The Ink Cartridges On The Printer.

  • Turn on the HP printer.
  • Open the ink cartridge access door.
  • Take off the ink cartridges one by one and check if they have sufficient ink.
  • Reinsert the ink cartridges one by one.
  • Close the cartridge door properly.
  • Try to print a test page to know whether the printer is performing well.

Change The Ink Cartridges:

  • Open the scanner unit.
  • Open the ink cartridge access door.
  • Pull out the ink cartridges one after the other.
  • Insert the new ink cartridges into the respective slots.
  • Once done, close the ink cartridge access door.
  • Close the scanner unit.

If your HP OfficeJet Pro 8025 Cartridge Problem is not resolved after going through all of the above steps then you can click the call button our technicians will provide you complete solutions of your problem remotely.

Copyright © 2021 - 2022 hp-ojpro.com | All rights are reserved.