You need a printer driver to your hp officejet pro 8020 connect to computer. Without the driver, connecting your printer to the computer is impossible. Usually, printers come with an installation CD; you can use it to install the driver. But, HP OfficeJet Pro 8020 doesn’t come with an installation CD. However, you can get the software from its official website. This article gives you a better insight into the procedure for connecting your HP OfficeJet Pro 8020 printer to your computer.


If you are going to connect your HP printer and the computer over a network, you should connect them over the same network. This segment will show you the procedure for connecting your HP OfficeJet 8020 printer to your router’s network. In case you want to connect your printer and the computer using a USB cable, you can proceed with the next section.

  • On your printer control panel, swipe down the dashboard and tap Wireless.
  • Touch Settings> Wireless Settings> Wi-Fi Setup Wizard.
  • When it shows you a list of nearby networks, select your router’s SSID and enter its password in the respective field. Enter the credentials manually if you cannot locate your router’s SSID. Then, the connection will be established within a short period.
  • If you have a WPS-enabled router, you can establish the connection in a much-simplified manner. To do that, tap Wireless> Settings> Wireless Settings> Wi-Fi Protected Setup. Then, press your router’s WPS button. The connection will be established between your printer and the router within a few seconds.
Hp OjPro 8020 Connect To Computer


  • As previously mentioned, the printer driver has to be installed on your computer to connect your devices (computer and printer).
  • To download the printer driver, visit HP’s official website from your default browser. Enter your printer model and go to its support page. There, click the Software, Drivers and Firmware tab.
  • Now, your Operating System will be detected, and the compatible drivers will be displayed. Select the driver you need and download it on your computer.
  • Once the download gets concluded, locate the file in the Downloads folder and run the setup file.
  • If you see the User Account Control (UAC) dialog box, click Yes.
  • Accept the terms and conditions when you see the software’s license agreement.  
  • On the Connection Method screen, select your preferred connection type. If you choose the Wireless Connection method, the installer will identify your router’s credentials and establish the connection between your HP printer and the computer.
  • For a USB connection method, make sure to connect your printer and the computer via the USB cable when prompted by the installer.
  • Follow the instructions and complete the installation.
  • From now on, you can just utilize the installed driver to access your printer.

In this way, you should connect your hp officejet pro 8020 connect to computer. For further clarifications and questions, you can reach out to us.

Copyright © 2022 - 2023 hp-ojpro.com | All rights are reserved.

Call Us