HP Officejet Pro 8210

• Begin the troubleshooting process by checking whether the correct media type is loaded into your printer’s tray. If not, remove the loaded paper and load the recommended media type into the tray. (Note: The recommended media types are envelopes, plain paper, photo paper, cards, labels, and custom sized papers).
• Check if the paper is overloaded in the tray. If yes, remove the overloaded papers without damaging them from the tray. Load the papers up to the maximum limit mark and print a test page to check whether the paper feed problem is fixed.

• If the problem persists, check whether the output tray and its extensions are opened properly. Open them if necessary.
• Check whether any dirt particles are stuck in the paper rollers. If yes, clean them and then print a test page.

Cleaning the rollers

• Raise your printer’s ADF cover.
• Now, get a lint-free cloth dipped in water and gently clean the rollers.
• Make sure that the rollers are cleaned properly.
• Close the ADF cover and print a test page.

Now, check if the “HP OfficeJet Pro 8600 paper feed” problem is fixed. If not, check and configure the paper settings. Similarly, update your printer software if available.

Updating the printer software